use digital inputs

A digital input feature detects if a voltage is above/below a specific threshold on a digital line.
  • Go to configuration and click on Digital Input tab.
  • Name the profile and select severity level.
  • Add lines to the profile.
  • For each line, select following parameters:
    DL1.JPG 84.15 KB
Device behavior: Select one of the two options. Pull down option, the contact will be closed if the voltage is from 5 Vdc to 32 Vdc. it Can be used to generate report that how long device remain in 0 state. Pull up option, the contact will be closed if the voltage is under 1 Vdc (GDN). Can be used to generate report that how long device remain in 1 state.

Alarm triggering: Alarm can be triggered when status changes on a line. This feature can be turned OFF when Device behavior feature is still ON for a particular line. Trigger on Zero: the contact is open.
Trigger on One: the contact is closed.

Time filter: Time required to trigger alarm.
  • Save the profile and assign it to desired vehicle.
  • Click on envelop icon to select notification groups that will receive corresponding alerts.

How did we do with this article?